Concrete Floors Naturally Look Amazing and Modern - Simple, Inexpensive, Quick Process - ARTICLE by MODE CONCRETE in Kelowna BC Canada

No concrete floor is complete without the application of a surface treatment. Punch up your concrete surface even further, by applying a staining agent or adding a color to the surface. Taking the time to put down this final layer of protection not only prolongs the life of your concrete floor, but also greatly enhances and preserves its natural beauty and appearance.

All pictures above, is a concrete floor surface finished and completed by MODE CONCRETE in Kelowna BC.

Think of a concrete floor sealer as a protective layer that will improve its appearance, durability and longevity.  Stain protection is the main reason for sealing concrete floors, especially in areas of your home or business where food and drink will be consumed. Pets may also cause damage to a concrete floors that can be prevented with sealant and wax. New concrete floors should be sealed after they are completed, while existing concrete floors should be sealed every few years based on wear and tear. Properly sealed and maintained concrete (natural or stained) will give the same beautiful appearance for years to come. It is extremely durable, requires very little maintenance, and will likely outlast the home or business which surrounds it. Always make sure that the concrete contractor preforms tests on small areas, or shows you samples of what to expect.

If you like the natural look and color of regular standard grey concrete, we usually recommend sealing and waxing.  It's our favorite look, and totally differs from project to project - every piece of concrete is original in it's coloring, textures, irregularities, and variations that occur naturally when the concrete dries and cures.  And the best thing about finishing your existing concrete floors... usually most projects (like this basement floor pictured below) it takes less than a week!

For more information on sealing, waxing or staining any interior or exterior concrete floors, decks, or surfaces, please contact MODE CONCRETE.  We service Kelowna and the entire Okanagan Valley, in BC Canada.

How often should you seal your exterior concrete? Concrete Pool Decks, Patios, Driveways and Pathways - Sealing, Yearly Maintenance, Repair & Refinishing

Concrete Pool Decks, Patios, Driveways and Pathways - Sealing, Yearly Maintenance, Repair & Refinishing 

ARTICLE BY THE PROS AT MODE CONCRETE IN KELOWNA BC.

Now is the perfect time of year to look at your exterior concrete, especially if your concrete is exposed to the extremely hot temperatures we have in the Okanagan.  Applying concrete sealers are an essential part of finishing any indoor or outdoor concrete surface. Protect your concrete driveway and patio from weather, staining, oil/gas, salt, and water by making sure you have a surface barrier on your concrete.

How often should you seal your exterior concrete? 
Everyone has something different to say about how often to seal your driveway. Some say every 3-5 years, whereas others say every year. The determining factor here should be what sort of weather or climate zone your concrete is exposed to. Environmental factors, rain, snow, freeze/thaw zones, or high sunshine areas should be taken into consideration.

If your concrete is exposed to moisture, freeze/thaw zones and lots of sunshine or heat (like the weather here in the Okanagan) your concrete might require re-sealing and maintenance every other year. If your concrete is exposed to salt or notice your sealer is deteriorating, you might have to reseal yearly. If you ever notice cracks or chips, you should fix these problems immediately. If damaged concrete is left unrepaired, water can seep into the cracks this will quickly deteriorate the concrete.

How can I tell if my concrete needs resealing? 
Water should bead up on the surface of the concrete if your sealer is doing its job. If this is not happening, it's time to reseal your concrete. High traffic areas or highly acidic areas (exposure to salt, chlorine, vehicles) will likely need resealing on a more frequent basis. Properly maintaining your concrete saves money in the long run. Make sure you have a protective barrier on your concrete to get the maximum longevity of your investment.It is recommended you seal your brand new concrete after it is cured (28 days after it's poured). If you don't seal your concrete, water may seep into the surface pores of the concrete, which can eventually lead to surface or structural damage.

Above is a driveway MODE CONCRETE sealed in Penticton BC.

Concrete services we offer on pool decks, pathways, driveways, patios or concrete slabs:

• Concrete cleaning 
• High power pressure washing
• Concrete maintenance
• Concrete sealing (for stained concrete, aggregate concrete, or stamped)
• Concrete patching
• Concrete chip and crack repair
• Adding anti-slip surface finishes onto concrete
• Acid staining, eco-based water staining
• Mildew removal
• Moss removal
• Troubleshooting water damaged concrete

We always offer expert concrete advice, superior workmanship and never cheap out on the products we use.  We only use the highest quality materials to repair, maintain or seal your concrete.  Whether your concrete is brand new, needs maintenance, or needs some repair... we are here to help.  People all over the Okanagan put their trust in Mode Concrete to get the job done right, with long term results.  We always offer free written estimates to our inquiring clients.  We always stay within the original estimated price and on schedule (weather permitting... we live in the mountains afterall!).

CONTACT us today for any of the services we discuss in this blog.